# 4-HIGH COLD ROLLING MILL – 200/650 × 650 mm
## Machine Description
4-High Cold Rolling Mill designed for cold rolling of aluminium alloys and copper.
The mill is suitable for processing soft-annealed, tightly wound and pickled coils, offering precise thickness reduction and controlled rolling operations.
The equipment features a work roll drive system, mechanical screwdown adjustment, hydraulic roll bending, roll balancing, tension reels, entry and exit guiding equipment, thickness measurement and an emulsion-based coolant system.
## 1. Basic Material Specifications
- **Machine type:** 4-High Cold Rolling Mill
- **Mill designation:** 200/650 × 650 mm
- **Suitable materials:** Aluminium alloys A1100, A3003, A5002 and copper (Cu)
- **Material condition:** Soft annealed, tightly wound coil and pickled
- **Maximum tensile strength:** 85 kg/mm² (annealed)
- **Material thickness range:** 0.05–3.0 mm
- **Material width:** 400–600 mm
- **Coil inner diameter:** Approx. 508 mm
- **Maximum coil outer diameter:** 1,500 mm
- **Maximum coil weight:** 5,000 kg
## 2. Rolling Mill Specifications
- **Rolling mill configuration:** 4-High (4HI)
- **Work roll diameter:** 200 mm (specified range: 200–180 mm)
- **Backup roll diameter:** 650 mm (specified range: 650–630 mm)
- **Roll barrel length:** 650 mm
- **Additional roll dimensions stated:** 720 mm / Ø200 × 740 mm (work roll); 720 mm (backup roll)
- **Rolling speed:** 300 m/min (Step 1)
- **Gear transmission ratio:** 3.5:1
- **Drive configuration:** Work roll drive
## 3. Motor Specifications
**Main Mill Drive**
- Motor power: 300 kW
- Motor speed: 0–1,500 / 1,500 rpm
**Right Tension Reel**
- Motor power: 110 kW
- Motor speed: 0–500 / 2,000 rpm
**Left Tension Reel**
- Motor power: 90 kW
- Motor speed: 0–400 / 1,600 rpm
## 4. Screwdown System
- Mechanical screwdown system
- AC motor drive: 7.5 kW
- Motor voltage: 440 V
- Encoder sensor included
- Maximum separating force: 300 tons
## 5. Work Roll Bending System
- Hydraulic roll bending device
- Hydraulic pressure specification: 200 kg/cm²
- Integrated roll balancing system
## 6. Entry Guide Equipment
The entry section includes:
- Deflector roll
- Hold-down roll
- Tension pad
- Side guide
- Coolant oil spray equipment
## 7. Exit Guide Equipment
The exit section includes:
- Air spray system
- Anti-rust deoiling pad
- Thickness gauge
- Deflector roll
**Thickness gauge specification:** 1000:3 – 4.5 t (as stated in the original documentation).
## 8. Roll Assembly
The roll assembly includes:
- Roll balancing system
- Roll bending equipment
- Drum assemblies
## 9. Tension Reel Specifications
**Right Tension Reel**
- Drum diameter: 508–700 mm
- Outer diameter: 1,200 mm
- DC motor power: 110 kW
- Tension capacity: 7 tons
**Left Tension Reel**
- Drum diameter: 508–700 mm
- Outer diameter: 1,200 mm
- DC motor power: 90 kW
- Tension capacity: 7 tons
## 10. Coolant System
- Emulsion oil type cooling system
- Coolant dirty tank
- Sump pump
## 11. Utility Requirements
**Electrical Power**
- Voltage: 440 V
- Three-phase supply
- Frequency: 60 Hz
- Specified power requirement: 500 kW
**Hydraulic System**
- General hydraulic unit
- Tank capacity: 400 litres
- Operating pressure specification: 100 kg/cm²
**Compressed Air**
- Continuous compressed air supply specified as 7 m³ in the original documentation (time basis not stated)
## 12. Main Features
- 4-High rolling mill configuration
- Suitable for aluminium alloys and copper
- Material thickness range from 0.05 to 3.0 mm
- Maximum processing width of 600 mm
- Maximum coil weight of 5,000 kg
- Rolling speed of 300 m/min
- 300 kW main mill motor
- Mechanical screwdown system
- Hydraulic work roll bending
- Roll balancing system
- Entry and exit guiding equipment
- Thickness measurement equipment
- Right and left tension reels
- Emulsion oil coolant system
## Applications
Suitable for industrial cold rolling operations involving aluminium alloys and copper, including sheet and strip thickness reduction and coil processing.
## Sales Information
**Machine:** 4-High Cold Rolling Mill
**Configuration:** 200/650 × 650 mm
**Manufacturer:** Not specified
**Year of manufacture:** Not specified
**Condition:** To be confirmed
**Price:** On request / Negotiable
**Seller: RWM – Remont Wire Machinery**
For additional information, technical details, availability and pricing, please contact RWM – Remont Wire Machinery.