2010-TAGLIABUE-AUTOMATIC GRINDING MACHINE

Seller Note

Technical Details :

Model: TAG T13 HP

Operating units:
(1) longitudinal sanding belts
(2) transverse sanding belt
Configuration: Transverse slipper, Roller, slipper-finish,
Use: For sanding veneered doors and varnish
Working width: 1,350 mm
Working thickness: yes 3 and 150 mm
Worktop height from the floor: 900 mm +/- 20 mm
Feed rate: 6-30 m / min.
Serving side: Right
Commands: Right
Electrical cabinet: On the machine , PLC Controil
Color: RAL 7035
Voltage: 400 V, 50 Hz, 3 P
Compressed air pressure: 6 bar
Control: 24 V
Standards: CE
Complete Power - 50 KW

Adjustable working thickness via computer - 3 - 130 mm
Computer-adjustable feed transducer - 5 - 25 m / min
Fixed desk standard height - 900 +/- 20 mm
Useful working width 1350 mm
Motor variator for feed - 3 Kw

1. Sanding belt dimensions - 7350x150 mm
Dimensions of lamella strip base - 5510x140 mm
Motor power with inverter - 15 Kw
Sanding belt speed - 2-20 m / sec

Grinding roller diameter - 330 mm
Roller rubber hardness - 30 Shore
Sanding belt dimensions - 3250x1350 mm
Motor power with inverter - 15 Kw
Sanding belt speed - 2-20 m / sec

2. Sanding belt dimensions - 3250x1350 mm
Dimensions of lamella strip base - 2620x1350 mm
Motor power with inverter - 15 Kw
Sanding belt speed - 2-20 m / sec

THE MACHINE IS EQUIPPED WITH THE FOLLOWING DEVICES:
1. Vacuum device equipped with electric fan and noiseless filter according to CE standards.
2. Pollination unit Antistatic roller SISAL (diameter 170 mm - motor 1.5 Kw) with mechanical gearbox for pressure adjustment. The roller is covered with a box and a cap with a diameter of 170 mm for dust extraction.
3. Smoothing unit with 200 mm diameter scotch-brite roller with mechanical gearbox for height adjustment. The roller is covered with a box and a cap with a diameter of 170 mm for dust extraction. Engine 2.2 Kw
4. Tampica brush for continuous cleaning of the conveyor belt with rotation in the opposite direction. Dust extraction is performed with a cap with a diameter of 150 mm - Motors 0.2 Kw
5. Rotary blowers with timing and box with 2 caps for dust extraction with a diameter of 160 mm to achieve max. Surface cleanliness
6. Carbon fiber antistatic strip for separating static electricity from the workpiece surface.
7. Grit-set electronic - with electronic jumping roller.
8. Device for quick and easy change of sanding belts.